Essential Ladder Safety Tips: Do’s and Don’ts

Ehs

Do’s and Don’t for Ladder use are here:

Do’s

  1. Place a ladder in stable and secure place.
  2. Ladder should have non-slip grip or secured with wood on lose soil so the ladder do not slip.
  3. While climbing on Ladder do not take heavy weight with you only light tools should be carry with you.
  4. Check all parts of ladder before using the ladder there should not be any type of rust of damaged.
  5. Before using ladder check for green tags which should have valid inspected date
  6. Climb the ladder facing towards ladder
  7. While climbing a ladder, use the 3 point contact technique. In this technique, a person should maintain contact with three body parts at all times. Eg. One hand and two feet or two hands and one foot.
  8. There should be one person to hold the ladder while one person working on the ladder.
  9. Ladder placing should be 1:4 or at 75 Degree angle.
  10. Ladder should be extended 1 meter above the platform

Don’ts

  1. Don’t stand on the top 3 steps (including stepladder or top 3 rungs of an extension ladder).
  2. Don’t climb of closed stepladder.
  3. Don’t climb on the back of a stepladder.
  4. Don’t climb the ladder of physically and mentally not well.
  5. Don’t stand or sit on a stepladder top or tool tray.
  6. Don’t tilt in one side or overreach to do side work it can lead to fall from height.
  7. Don’t exceed the maximum load capacity
  8. Don’t allow more than one person at same time on stepladder or an extension ladder.
  9. Don’t Work on Damage ladder especially damaged rungs.

Welding Arc splattering
Verified by MonsterInsights